Cement used disk vacuum filter

GP disc vacuum filter is the national "eight five" key scientific and technological projects, the State Planning Commission in 1991 approved the project, task issued to the company and the preparation of joint development, and in 1994 a identified by the Ministry of coal, the machine series products have obtained the coal ministry science and technology progress prize two and national key new product certificate and certificate of high-tech products in Jiangsu province.

Our company developed the GP series cement slurry dehydration with disc vacuum filter in the filter cake moisture with domestic products of low, high filtering coefficient, small occupation area, low energy consumption and the general advantages at the same time, with the German and American technology, this model according to the characteristics of cement slurry dehydration process, between the whole properties and components than the optimization, through the practical application proves that the main technical and performance indicators have reached the domestic advanced level of similar products. Per ton of clinker can reduce by 40 ~ 50 kg of standard coal than the original process, provides the solution of the most advanced for the majority of the wet process in energy saving and cost reducing, improving economic efficiency. Transformation of the equipment is widely used in the wet process kiln and wet grinding and dry process production line.

use：

For cement paste, calcium carbide residue dehydration

Main features:

1. the machine sector plate with ultra high strength polypropylene molding, high strength, not easy to deformation, and longer service life than glass steel improves several times; the fan-shaped plate hole rate as high as 30%, which is not caused by blockage in the filtering effect, and is conducive to further improve the yield and reduce the filter cake moisture.

2 .each filter disc with 20 fan-shaped plates, strengthened the control of the filtration process, the filter cake evenly.

3. filtrate pipe section, distribution head cavity volume, is conducive to improve the pumping rate and the filtrate discharge.

4. the reverse blowing and scraper to discharge the material, so as to ensure the rate of filter cakes.

5 .the gear drive, inverter speed control, speed range, reliable operation.

6 .the structure of filtrate pipe was optimized, eliminating the original flange leakage due to aging of rubble. Filtrate pipe wall thickness is increased to 6mm and is lined with ceramic tile.

7. the centralized lubrication oil pump, ensure the normal operation of equipment.

8 .according to the characteristics of the cement industry, the use of pneumatic stirring system.

9 .control system adopts Siemens PLC and Mitsubishi inverter, and can provide and accept all kinds of control signals to control.